The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares V35 V50 NTX 350 Monza Imola Fuel and Carburettors

Sort by Title

Sort by Price

Page 8 of 11

1 2 3 4 5 6 7 8 9 10 11

Idle Screw Kit

FUA93600 Fits 1100 Sport Carb, Cali 1100 (carb), 850/1000 ALL Models, V35 ALL, V50 ALL, V65 ALL, V75, Nevada 350, Nevada 750 (1991-2003)

Dellorto kit containing idle adjust screw, o ring, spring and washer

Fits all VHB, PHF, PHBH and PHM carbs

part in stock 1 in stock

13936600 GU13936600 13 93 66 00
1393 6600 1393.6600 13.93.66.00

£8.00

INC VAT

£6.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Fuel Tap LH With Level Sender

TAA23370 Fits 750 SP, Strada 750, T5 Polizia, Spada 3, Strada 1000, Mille GT, V35 3, V50 PA, V65 Florida, V65 GT, V75 PA

Dimensions:
M16 x 1 threaded section, 140mm sender

Manual left hand petrol tap with nut and fuel level sender. On and off settings.

Will also fit most other Moto Guzzi tanks from 1976 to 1991, these can be used to replace discontinued electric taps but please measure first and check you have space for outlet pipe

part in stock 1 in stock

23105370-z 23105370 GU23105370 23 10 53 70
2310 5370 2310.5370 23.10.53.70

£29.00

INC VAT

£24.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Float

FUA19381 Fits V65 ALL, V35 ALL, V50 ALL, Nevada 750 (1991-2003), Nevada 350

Dellorto 12.5g float with tang for needle valve

part in stock 1 in stock

£22.50

INC VAT

£18.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Breather Pipe 50cm

ENA27982 Universal Part

Dimensions:
6mm ID x 9mm OD x 50cm length

50cm Ariete fuel or breather pipe suitable as fuel pipe on gravity fed non injection models

Certified ethanol proof and safe for modern E10 fuel. Hose clips also available, see FUA00004

part in stock 1 in stock

£3.00

INC VAT

£2.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Polished Short Alloy Bellmouth Intake

ACA12003 Fits V50 3, V65 ALL, NTX 350, V35 Florida, Imola 2, Nevada 350, V50C, 750 Targa, Strada 750, NTX 750, Nevada 750 (carb models)

Dimensions:
43mm ID x 44mm long

Short alloy bellmouth / trumpet intake with domed mesh for Dellorto PHBH 30 carb, replacing air filter. Clamp on type

Supplied with fixing clip, carb shown is for illustration purposes

This part is available by special order, request a quote

£41.00

INC VAT

£34.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Throttle Cable

CAA19575 Fits V50 Monza

Dimensions:
920mm outer length, 105mm free length. 5.7mm barrel nipple, 2.7mm barrel nipple

Throttle cable

We advise you to measure your existing cable before ordering in case you have a non standard set up.

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

19117575 GU19117575 19 11 75 75
1911 7575 1911.7575 19.11.75.75

£8.90

INC VAT

£7.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Choke Cable Upper

CAA27132 Fits V75 PA, 750T, Strada 750, 750 SP, 750X PA, NTX 650, NTX 750, Nevada 750 (1991-1993), V50 PA, NTX 350

Dimensions:
692mm outer length, 60mm free length, 5.7mm barrel nipple, 2.7mm barrel nipple

Upper choke cable

We advise you to measure your existing cable before ordering in case you have a non standard set up.

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

27132815 GU27132815 27 13 28 15
2713 2815 2713.2815 27.13.28.15

£15.25

INC VAT

£12.71 EX VAT this is the price you will pay if you are ordering from outside the UK

Throttle Cable Lower

CAA27775 Fits Lario (Domino switches), V65 Florida (Domino switches), NTX 350, NTX 650, NTX 750, Nevada 750 (1991-2001), Nevada 350 (1998-1999)

Dimensions:
310mm outer length, 77mm free length, 2.7mm barrel nipple, 2.7mm barrel nipple

Throttle cable

Replaces Guzzi ref. 27117715. We advise you to measure your existing cable before ordering in case you have a non standard set up.

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

27117775-z 27117775 GU27117775 27 11 77 75
2711 7775 2711.7775 27.11.77.75

£9.00

INC VAT

£7.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Choke Lever Assembly Dellorto VHBT

FUA13800 Fits V35 I, V35 II, Imola, V35C, V35 3, V35 TT, V50 I, V50 II

Dimensions:
8mm OD x 13mm brass plunger

Carb mounted flip choke with plunger, lever, O ring, casting and spring

Contains rubber seat insert. Allows you to eliminate the choke cables and any handlebar choke controls for a cleaner look, especially suitable for special builds

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

£19.00

INC VAT

£15.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Dellorto 45 Pilot Jet

FUA14845 Fits Imola 2, V50 3, Monza

Dellorto size 45 pilot / idle jet

Fits all PHF, PHM, PHBH and VHB carbs used on Moto Guzzis

This part is due back in stock soon, call 01484 841395 to reserve yours

£5.15

INC VAT

£4.29 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 8 of 11

1 2 3 4 5 6 7 8 9 10 11